2024 BaumaLight QC Series PTO Generators 480 Volt 3-Phase QC 105-4

2024 BaumaLight QC Series PTO Generators 480 Volt 3-Phase QC 105-4

Designed for mobile or standby electrical power, the QC PTO generator for 480 volt three phase models are ideal for your farm or rural property. At 100% load, these QC PTO models offer 33 KW to 113 KW and momentary surge from 85 KW up to 315 KW. The -4 480 volt configuration features a different panel as well as a different breaker and doesn’t include the welder receptacle or the 20 amp duplex receptacles. To determine exactly how much power you need, you can find specific information on our website by using our Power Calculator as well as our Principles Chart, which outlines which QC PTO generator model will best suit your property’s power requirements.

Features may include:

• Pairing your PTO generator with your tractor’s powerful engine and converting that power into electricity gives you a convenient and reliable back-up and remote power solution for your property – simply by using your tractor. Before setting your PTO speed, ensure that the PTO driveline is perpendicular with the generator transmission. If necessary, remove the bolt and adjust the trailer tongue. This will help the shaft to stay straight with no bend in the universal joint on the generator side while ensuring a more consistent PTO speed and helping with vibration.

• QC PTO generators provide convenient and reliable back-up and remote power for your property – simply by using your tractor. All QC PTO generators come with a full-load main outlet, along with a higher-than-average number of plug-in options – giving you several different ways to use your generator.

• Designed to meet the needs of your operation, the QC PTO generators are built for 24 Hr. 7 day a week dependability. The heavy-duty genset features a cast-iron body with four oversized copper windings for more efficient power generation. Integrated cooling fans allow for venting at the front and back of the genset.

• Designed exclusively for Baumalight QC PTO generators, the DisplayMaster1 is your guide for quick, easy setup and an "at a glance" monitor of key performance factors. The intuitive three light system gives instant feedback whether over or under speed. The DisplayMaster1 screen also shows the generator’s voltage, frequency and amperage; KW, KVA and Power Factor; runtime and KW hours; and peak/average KVA.

• With Baumalight’s Reset Circuit Breakers, you can protect your PTO generator against short-circuit damage without the worry of blown fuses. When your PTO generator experiences a power surge, simply reset the breaker and restart the generator.