2024 BaumaLight Stump Grinder Tractor 1P24

3PT Hitch Stump Grinder - 24" Rotor
MoreLess
Limited Time Offer!

Selling Price -$4,200.00

2020 BaumaLight 3 Point Hitch Stump Grinder 1P24

3 Point Hitch Stump Grinder - 1P24

The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1 3PH. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24" Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10" above ground and 6" below ground. With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes.

All Baumalight stump grinders are made in North America and sold through dealers so you always will have local support to service or support your stump grinder.
QUICK HITCH COMPATIBLE

The 1P24 Stump Grinder is CAT 1 Quick Hitch compatible, allowing you to easily connect to your compact tractor.

SLIP CLUTCH PTO SHAFT

The 1P24 Stump Grinder includes a slip clutch PTO shaft. In the event that the grinder hits a rock, the slip clutch is designed to slip so that the shaft is not damaged. (this started in mid 2020).

SELF-REGULATING FEED

For smoother operation, the 1P24 3-point hitch stump grinder features a self-regulating feed function that uses the weight of the grinder head. If you suddenly advance your tractor while grinding, a hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump.

CARBIDE TIPPED

Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.

MORE TEETH

Many hands make light work, or in this case fine mulch faster and easier. The high number of teeth means that each tooth does less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of these rugged teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement.

ROTOR

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

MORE CLEARANCE

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

GREASEABLE PINS

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

  • 2024
  • BaumaLight
  • Stump Grinder Tractor
  • 1P24
  • Stump Grinders
  • Recommended HP Size: 20-45 | Maximum Engine HP: 50
  • Hub Torque: 803 Ft.-Lbs.
  • 40 hp
  • Hydrostatic only
  • Cutting Wheel Speed: 540 RPM | Input Speed: 540
  • Rotor Size: 24" | Maximum Horizontal Cut: 22" | Swing Arc: 0°
  • (Shipping): 48"
  • (Shipping): 48"
  • Cutting Above Ground: 10"
  • Cutting Below Ground: 6" | Cutting Per Pass: 5"
  • Unit: 350 Lbs.
  • Number of Teeth: 34 | Over Torque Protection: Slip clutch
  • Tooth : Carbide steel bolt-in
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $5,200.00
  • $4,200.00
  • Cobden, Ontario
  • New
  • 2024
  • BaumaLight
  • Stump Grinder Tractor 1P24
  • GREY
  • Hydrostatic only
  • Available
  • (Shipping): 48"
  • Cutting Above Ground: 10"
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.